XT Series PIcnic Table - Using Lumber

View Description

Model: XT

Configure Product

Frame Finish

Select the finish you want on the frames.
Material Options


Select the Material and Length you want for this product.
Material Options

Product Description

Series Overview

Model XT Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required.


Model XT Picnic Tables feature our non-tip, non-trip, walk-through design.  The table won’t tip even if all persons sit on one side.  Easy walk-through access.  “Skid” design permits movement without damage to turf. Model XT Picnic Tables offer 30" nom. table height; 18" nom. seat height.

FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications).  Top/seat mounting angles are 2" x 2" x 3/16" steel angles.  Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel.  All 3/8" dia. galvanized carriage bolt fasteners.  Warranted for life.

FINISH: Standard finish: hot dip galvanized after fabrication.  Or choose a powder coat finish (in place of galvanized finish) in your color choice.

LENGTH: Tables can be 6, 8, 10 or 12 ft. long.

TOP/SEAT MATERIALS: 2” x 10” (nom.) untreated or pressure treated #1 southern yellow pine.  See Material Options.

OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).


Website design and development by Spindustry Digital, Des Moines, Iowa