FSW-26/7 Campfire Ring

View Description

Model: FSW-26

Configure Product

Campfire Ring side heights

Choose your campfire ring side height.
Material Options

Campfire Ring Anchor Systems

Choose your desired anchor system configuration
Material Options

Campfire Ring Shelf Options

Material Options

Product Description

Series Overview

The FSW Series Campfire Rings combine a single level swivel cooking grate with our flanged fire ring.  The 300 sq. inch single level Swivel Grate will move 180 degrees – from over the fire to completely out of the fire ring – for easy fire building and serving.  The handle is never over the fire. 

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

Model FSW-26 Series Campfire Ring features a 24” inside diameter and is available in a single side height of 7-3/8”.

FSW Series fire rings include tip back anchor pins (standard) to keep the campfire ring secured in one place, but allow the fire ring to tip up for easy clean out.  These pins must be set in concrete.  Other anchor systems are available such as the angle spade anchors and tip-back angle spade anchors.  These optional anchor systems allow for the anchors to be driven into the ground without the use of concrete.  However, the angle spade anchors do not allow the ring to tip back for clean-out. 

The cooking grate is a single, welded component using ½-inch dia. steel bars, mounted on a 2-3/8” OD steel tube allowing it to swivel 180 degrees.  The operator handle includes a 1/8” x ½” flat bar coiled spring grip.  All grate bars are welded on both sides.  All fire rings are finished with high temp non-toxic black enamel paint.

OPTIONAL: Model S-5 Bolt-on utility shelf 

Website design and development by Spindustry Digital, Des Moines, Iowa