FSW-26/18 Accessible Campfire Ring

View Description

Model: FSW-26

Configure Product

Campfire Ring side heights

Choose your campfire ring side height.
($222.00)
Material Options

Campfire Ring Anchor Systems

Choose your desired anchor system configuration
($18.00)
Material Options

Campfire Ring Shelf Options

($15.00)
Material Options

Campfire Ring Heat Shields

Select an optional heat shield for your campfire ring. NOT AVAILABLE on 7" tall rings.
($60.00)
Material Options

Product Description

Series Overview

The FSW Series Accessible Campfire Rings combine a single level swivel cooking grate with our flanged fire ring.  The 300 sq. inch single level Swivel Grate will move 180 degrees – from over the fire to completely out of the fire ring – for easy fire building and serving.  The handle is never over the fire.  This Swivel Grate design meets the ADA guidelines for reach and operability.

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

Model FSW-26 Series Campfire Ring features a 24” inside diameter and is available in a single side height of 16-7/8”.

The fire ring is filled with aggregate (not included) to about 9" above the ground to provide the elevated fire surface needed for wheelchair access.  This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas.  Drain/draft holes are provided around the perimeter of the campfire ring.

The cooking grate is a single, welded component using ½-inch dia. steel bars, mounted on a 2-3/8” OD steel tube allowing it to swivel 180 degrees.  The operator handle includes a 1/8” x ½” flat bar coiled spring grip.  All grate bars are welded on both sides.  All fire rings are finished with high temp non-toxic black enamel paint.  Pin anchors provide a fixed location and must be set in concrete.  The other anchor system available is the angle spade anchor system.  This allows for the anchors to be driven into the ground without the use of concrete.   However, the angle spade anchors do not allow the ring to tip back for clean-out. 


OPTIONAL: Model S-5 Bolt-on utility shelf 

OPTIONAL: Heat Shield (Model HS-F26)

 

Website design and development by Spindustry Digital, Des Moines, Iowa