FX-30 Series Campfire Ring Only
Campfire Ring Side Heights
Campfire Ring Anchor Systems
Campfire Ring Shelf Options
When you need the fire barrier only, without the cooking grate.
Our FX Series Campfire Rings provide a solid steel fire barrier, and do not include the cooking grate.
Perfect when you don’t plan to cook over the fire, but you need the barrier to control the fire, and protect the property or your landscape blocks.
The FX Series steel ring is rolled from 3/16” thick steel plate with an integral formed 1” wide flange around the top edge. This flange provides extra strength against heat warpage and eliminates a vertical edge. Draft holes are provided for fire ventilation.
FX-30 Series Campfire Rings have a 30-inch inside diameter, a 32" outside diameter at the top flange, and come in three different side heights. Select the side height to achieve the degree of fire barrier needed.
All FX Series firerings come with tip back anchor pins (/TB) to keep the ring secured in one place, but allow the ring to tip up for easy clean out. The pins should be installed in concrete footings.
OPTIONAL Anchor Systems:
Angle Spade Anchors (/AL) are 3 spades attached around the firering and buried in the ground. The firering cannot be tipped up.
Tip Back Spade Anchors (/TA) are 2 spades at the rear hinge point and buried in the ground. The firering can be tipped up.
OPTIONAL: Model S5 bolt on utility shelf.
OPTIONAL: Model DIG-U2 removeable, drop-in cooking grate.
OPTIONAL: Model CFX-30 Snuffer Cover.