FS-30/11 Series Campfire Ring - BUY NOW
Campfire Ring Anchor Systems
Campfire Ring Shelf Options
The FS Series Campfire Rings combine a single level cooking grate with our flanged fire ring – an economical design when cooking over the fire might be a lower priority.
Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge. This flange provides extra strength against heat warpage and eliminates a vertical edge. Draft holes are provided for fire ventilation.
290 sq. inch single level cooking grate is hinged to the campfire ring and remains permanently attached.
Model FS-30/11 Campfire Ring features a 30” inside diameter and is 11-3/8” tall.
FS Series fire rings include tip back anchor pins (standard) to keep the campfire ring secured in one place, but allow the fire ring to tip up for easy clean out. These pins must be set in concrete. Other anchor systems are available such as the angle spade anchors and tip-back angle spade anchors. These optional anchor systems allow for the anchors to be driven into the ground without the use of concrete. However, the angle spade anchors do not allow the ring to tip back for clean-out.
Cooking grate adjustment handles, made from 3/4" dia. steel, reach outside of the firering, away from the fire. The handle grips are 1/8" x 1/2" coiled steel bar. The cooking grate is built using 5/8" dia. steel perimeter bars and 1/2" dia. steel grate bars. All grate bars are welded on both sides. The grate hinges are formed using 5/8" dia. steel bar.
OPTIONAL: Model S-5 Bolt-on utility shelf