Anchoring Systems for Firerings

Firerings may be anchored in several different ways. Not all anchoring systems are available on all firerings. Check the description for each firering to determine which anchoring options are available.

TIP-BACK ANCHORS (TB)
Tip-back anchors for firerings, as specified by /TB in the model numbers, permanently locate firerings yet allow them to tip back for easy clean-out. The anchors are 1/2" dia. steel rod designed to be installed through welded-on tip-back brackets at the rear of the firering and embedded 15" into a concrete footing.

TIP-BACK ANGLE SPADE ANCHORS
(TA)
Tip-back angle spade anchors for firerings, as specified by /TA in the model numbers, secure firerings on site without concrete footings and allow the firering to tip back. Two angle spade anchors are inserted into the ground. The 1/2" dia. steel rod hinge pin is inserted through holes in each anchor and through the holes in the tip-back brackets welded to the firering. The rod is bent to secure the firering to the anchors.

ANGLE SPADE ANCHORS (AL)
Angle spade anchors for firerings, as specified by /AL in the model numbers, secure firerings on site. The firering cannot be tipped up. The anchors are constructed of heavy 3/16" x 1-3/4" x 1-3/4" A-36 steel angle with a welded-on spade of 1/8" steel. Anchors are attached at equidistant points around the firering and installed directly into the ground without the need for concrete.

PIN ANCHORS (PA)
Pin anchors for firerings, as specified by /PA in the model numbers, permanently locate firerings. The anchors are "U" shaped 1/2" dia. steel rods and are embedded 15" into concrete footings. The anchors are installed through the draft/drain holes located around the lower perimeter of each firering. The firering cannot be tipped up.

Park Grills | Campfire Rings | Picnic Tables | Park & Street Benches | Trash & Recycling Receptacles
Bike Racks & Parking | Wheelchair Accessible Products | 100% Recycled Products | Site Amenities
New Products | About Us | Contact Us | How to Order | Price List | Request a Price Quote
GSA Contracts | Request a Catalog | Sitemap | Home

Copyright 1996 - 2012 R.J. Thomas Manufacturing Co., Inc.
PO Box 946, 5648 Hwy. 59 South, Cherokee, Iowa, USA 51012-0946
(712)225-5115 ~~ TOLL FREE (800)762-5002 ~~ FAX (712)225-5796
Office Hours: Monday-Friday 8:00 A.M to 5:00 P.M. Central Time

Pilot Rock ® is a registered trademark of R.J. Thomas Mfg. Co., Inc.
www.pilotrock.com ~~ pilotrock@rjthomas.com

R.J. Thomas Mfg. Co. Inc. manufactures Pilot Rock park and camp equipment, a wide selection of Commercial Quality Park, Street and Camp Site outdoor furniture for parks, campgrounds, recreational areas, schools, playgrounds, street scapes and landscapes. R.J. Thomas makes Pilot Rock charcoal grills, covered charcoal grills, wheelchair accessible charcoal grills, campfire rings, fire pits, wheelchair accessible fire rings, ground grills, portable picnic tables, pedestal picnic tables, recycled plastic picnic tables, wheelchair accessible picnic tables, park benches, athletic benches, recycled plastic benches, street benches, bike racks, pedestal park grills, charcoal grills, bbq grills, firerings, outdoor furniture, picnic tables, trash cans, trash can lids, trash receptacles, waste receptacles, garbage cans, recycling lids, recycling systems, bear proof trash containers, animal proof trash can cover, camping lantern poles, flagpoles, utility tables, recycled plastic car stops, recycled plastic speed bumps, smoking waste disposal systems, pet waste containers, custom signs, signage, truck signs, vehicle graphics, business signs, park and promotional signs, banners, trail marker signs and more. Contact RJ Thomas and Pilot Rock.

Designed, maintained
and hosted by: