• The FS Series Campfire Rings combine a single level cooking grate with our flanged firering – an economical design when cooking over the fire might be a lower priority.

• Ring is rolled from a minimum 3/16" thick steel plate with an integral formed 1" wide flange around top edge. This flange provides extra strength against heat warpage and eliminates a vertical edge. Draft holes are provided for fire ventilation.

• 290 sq. inch single level cooking grate is hinged to the campfire ring and remains permanently attached.

• FS Series Campfire Rings are available in 4 different diameters, and up to 3 different side heights (see charts below). Select the diameter to control the size of fire, and the side height to achieve the degree of fire barrier needed.

• Tip back anchor pins (standard) keep the firering secured in one place, but allow the ring to tip up for easy clean out. Other anchor systems available. (See Anchor Systems)

• Cooking grate adjustment handles, made from 3/4" dia. steel, reach outside of the firering, away from the fire. The handle grips are 1/8" x 1/2" coiled steel bar. The cooking grate is built using 5/8" dia. steel perimeter bars and 1/2" dia. steel grate bars. The grate hinges are formed using 5/8" dia. steel bar.

• Pilot Rock makes solid wall steel campfire rings without any decorative cutouts. These cutouts would only weaken the ring and subject it to premature failure, and they eliminate the original fire barrier function of the ring.

• Optional: Bolt on utility shelf Model S5 (See Utility Shelf).

• Start your campfires quickly with Pilot Rock Firestarters.