Model B110C/CB-6PU24
Accessible Bench, black powder
coated frames, 6 ft. long,
2” x 4” (nom.) 100% recycled plastic
seat planks in Blue color.

Model B111C/CR-6PA24 accessible
bench, red powder coated frames,
6 ft., 2” x 4” gray recycled plastic
seat planks, illustrating embedded
frame post installation.

Model B110C/G-6TP24 accessible
bench, hot dip galvanized frames,
6 ft., 2” x 4” treated pine lumber
seat planks.

Accessible Park Benches

• This new Accessible Bench incorporates the ABA and ADA suggested design guidelines for accessible seating (see footnote below). The full-length grab bar across the back of the bench enhances access and transfer to or from this bench.

• All welded frame fabrication: seat/back support channel is die-formed from 1/8" thick (11 ga.) steel, frame post and portable/surface mount foot are made using 2-3/8" OD steel pipe.

• Hot dip galvanized frame finish is standard.

• Optional: powder coat finish. (see Material Options)

• Model B110C Features: 6 ft. long, portable/surface mount frames, grab bar 35" high, seat width 20", seat height 18-1/2" (nom. dimensions), includes 9/16" dia. anchor holes in foot (surface anchors are not included).

• Model B111C Features: 6 ft. long, embedded frame post installation, grab bar 35" high, seat width 20", seat height 18-1/2" (nom. dimensions).

• Seat/Back plank materials include 2" x 4" (nom.) lumber, or 100% recycled plastic. (see Material Options)

• Optional: custom engraved lettering or plastic laminate plaques are available on lumber and recycled plastic. (see Bench Signage)

Note: Meets guidelines as presented in Federal Register, June 20, 2007, Part II Architectural and Transportation Barriers Compliance Board, 36 CFR Part 1195, ABA Guidelines for Outdoor Developed Areas; Proposed Rule: Part T213, T313 and T411. Also meets suggested design guidelines in ADA and ABA Accessibility Guidelines dated July 23, 2004, Chapter 9: Built-In Elements, Part 903 Benches