 |
|
|
|
|
 |
|
|||
 |
 |
 |
|
|
 Model AT-6TP park table, 6 ft., pressure treated pine. |
|
|
AT Series: • Model AT Picnic Tables are the traditional A-frame design with updated features to provide long-lasting quality. • Cross supports are fabricated pre-galvanized steel channel to make end frames sturdier and make seat support stronger. Two 1-5/16" OD steel tube diagonal braces bolt to these cross supports and to center channel under table top to tie entire picnic table structure together. Fastened with 3/8" dia. carriage bolts, these steel components replace the lag-bolted lumber braces on lesser tables. • Model AT A-frame picnic tables use: 4" x 6" (nom.) leg post and 2" x 10" (nom.) seat/top planks. The tables are constructed using either pressure treated #1 southern yellow pine or 100% recycled plastic. (See Material Options.) • Available lengths: 6 and 8 ft. lengths; plus a wheelchair accessible design with 6 ft. long seats and 8 ft. long top extended 1 ft. at each end providing two wheelchair access points with the ADA recommended clearances of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe). A 12 ft. long picnic table using 3 frames is available in treated pine only. 
|
  Model
AT/W-6PN/E1 wheelchair accessible park table,
6 ft. seats, 8 ft. top extended 1 ft. at both ends
for two wheelchair access points, brown leg posts
and green top/seat planks are 100% recycled plastic. Model AT-12TP park table, 12 ft., 3 frames, pressure treated pine lumber. |
