 |
|
|
|
|
 |
|
|||
 |
 |
 |
|
|
|
1. Auger Anchor (at Left): Screw-type auger; 1/2" diameter steel shaft with 3" diameter auger. Screw into ground until only “eye” is exposed. Includes 30" long heavy link chain secured to stake with cold shut. Optional Model PL-1 padlock can secure chain to table. Model AGS-1. |
|
|
|
2. Angle Anchor (at Right): One pair of formed steel angles. Use with AT and RT tables and RB benches. Angles attach to frames with included screws. Then secure to surface with bolts appropriate for mounting surface (not included). Use one pair per frame member. Model ANG-2. |
 |
|
|
|
|
3. Strap Anchor (at left): One pair, secures picnic tables with steel tube frames. Anchor bolts not included. Use one pair per end frame. Model ANG-3: fits 2-3/8" OD frames – XT and BTXG picnic tables. Model ANG-5: fits up to 1-5/8" OD |
|
|
|
4. Drive-In Ground Anchor (at Right): Easy installation. Anchor is driven deep into ground with heavy hammer and optional drive stake. Attaches to picnic table or park bench frame with wire rope and/or heavy chain. Optional Model PL-1 padlock can secure wire rope to bench/table. Model 68-AT1: 1100 lb. capacity, 3/16" x 5 ft. galvanized wire rope. Model 88-AT1: 3000 lb. capacity, 1/4" x 6 ft. galvanized wire rope. Model 68-ATC: 1100 lb. capacity, 1/4" x 4 ft. proof coil chain with 1 ft. wire rope. Model 88-ATC: 3000 lb. capacity, 1/4" x 4 ft. proof coil chain with 2 ft. wire rope. Drive Rods: Model DS-68: 1/2" x 3 ft. steel rod with large striking head. Use with #68-AT1 and #68-ATC anchors. Model DS-1: 3/4" x 4 ft. steel rod tapered to 1/2", large striking head, heavy-duty, for frequent use. Use with #68-AT1 and #68-ATC. Model DS-2: 3/4" x 4 ft. steel rod,
large striking head. For use with #88-AT1 and #88-ATC. |
 |
|
|
