|
 |
||
 |
 |
   |
|
 Now One Person Can Move Heavy Picnic Tables! |
|
| Model TM-500 Table Mover shown
with Model WXTH/G-8PB Universal Accessible Park Table. |
|
| • A commercial quality tool for relocating picnic
tables for a special event or for seasonal storage. • The TM-500 works independently of the frame style because it attaches to the seat plank. It will work on most park table designs regardless of brand: rectangular tables up to 12 ft. long; tables with steel frames or molded plastic frames; A-frames and walk-through (skid-type) frames; tables with wood, aluminum, plastic or coated steel tops and seats. (Does not work on split seat tables such as side access and Model T600.) • The design can accommodate many seat plank widths and thicknesses (max. 3" x 12-1/2"). • Allows one person to move heavy picnic tables. Does not require use of motorized vehicles or licensed operators. |
• Picnic Tables can be moved over most firm ground
surfaces, low curbs, and into or out of remote areas
not accessible to vehicles. • Pneumatic tires provide a wide, stable platform to carry the picnic table weight (up to 500 pounds) so the operator just pushes, pulls and steers. Minimal lifting is required so there is less chance of a lifting injury. • The simple design uses few moving pieces or loose parts. • Hot dip galvanized finish is maintenance free. The Seat Hook is thermo-plastic coated to protect the seat plank surface. |
| Watch the video of Model TM500 Table Mover | |
How the Picnic Table Mover Works ... |
|
 Slide the Seat Hook under the seat plank and into the Table Mover Post and secure it. |
 Slip the first Lifting Pin under the plank and swing its handle into the locking loop. |
 Raise the Table Mover post to a vertical position. |
 Install the second Lifting Pin and secure it. Repeat the installation on the opposite seat plank. |
|
|
