 |
|
|
|
|
 |
|
|||
 |
 |
 |
|
|
| RT
Series: • Model RT Picnic Tables feature: 3" thick, single-piece end frames molded from 100% recycled plastic; 2" x 10" (nominal) seat/top planks molded from 100% recycled plastic. All plastic components are available in choice of colors. (See Material Options page.) • Top/seat mounting angles are formed from pre-galvanized steel. The table structure is reinforced with diagonal braces of 1-5/16" OD pre-galvanized steel tube. All 3/8" dia. galvanized carriage bolt fasteners. These steel components add strength, solving the durability problems of lesser plastic picnic tables. • RT Picnic Tables are available in 6 and 8 ft. lengths, plus a wheelchair accessible design with 6 ft. long seats and 8 ft. long top extended 2 ft. at one end providing the ADA recommended wheelchair clearances of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe). • Model RT Picnic Tables feature our nontip, nontrip, walk through design. Won’t tip even if all persons sit on one side. Easy walk through access. “Skid” design permits easier movement. Tables offer 30" nom. table height; 17-1/2" nom. seat height. |
 Model RT/W-6C park table, 6 ft., brown frames, cedar colored top/seat planks. |
  Model
RT/N-6C/E park table, green frames, cedar colored
top/seat planks, 6 ft. seats, 8 ft. top extended
at one end to provide wheelchair access. |
|
|
|
