New Products How to Place an Order GSA Contracts Home

Site Amenities
Recycled Plastic Products Wheelchair Accessible Products Bike Racks & Parking Trash & Recycling Receptacles Park & Street Benches Picnic Tables Campfire Rings Park Grills

  
 

Model EB3-24, 24 ft. high, 3 sections
Flag Poles:

• These attractive, fully anodized aluminum flagpoles give years of problem-free use and maintenance. And they are 100% made in the USA.

• Flagpoles are available in a variety of sizes, and may be mounted directly into a concrete footing, surface mounted with the convenient swing base, or secured with a basic bolt down base. The swing base design allows the pole to be easily erected or taken down by one person, and facilitates easy repairs.

• The poles are extruded (seamless) aluminum pipe, using alloy #6063-T6. This provides the poles with maximum strength with minimum weight. The pipe is then anodized bright silver. The pole castings are poured aluminum finished to a lasting shine. The sectional design allows easy assembly and installation. If the pole is damaged, only the affected section needs to be replaced.

• These are complete kits with all equipment needed to raise and lower the flag.


Model No.
Height (ft.)
Base
Number of
Sections
Maximum
Flag Size (ft.)
Shipping Method
EB3-20
20
Embedded
3
3 x 5
UPS
EB2-20
20
Embedded
2
3 x 5
Truck Freight
EB3-24
24
Embedded
3
3 x 5
UPS
EB3-30
30
Embedded
3
4 x 6
Truck Freight
EB3-36
36
Embedded
3
4 x 6
Truck Freight
SB3-20
20
Swing
3
3 x 5
UPS
SB2-20
20
Swing
2
3 x 5
Truck Freight
SB3-24
24
Swing
3
3 x 5
UPS
SB3-30
30
Swing
3
4 x 6
Truck Freight
BB2-18
18
Surface Bolted
2
3 x 5
UPS

 

Three Mounting Methods  

EB Models: Embedded Base Installation
The EB Model poles are available as 2-section or 3-section poles. The bottom 18 inches of the pole pipe is cemented into the ground footing. The above ground height of the EB pole is 1-1/2 ft. less than the pole height number.


Embedded Base (EB)

     

SB Models: Swing Base Installation
The SB Model poles are available as 2-section or 3 section poles. The swing base assembly is anchored to the concrete footing and the bottom pole section is installed into the base. This hinged mounting allows the pole to be laid over for easy maintenance. The above ground height of the SB pole is the same as the pole height number.


Swing Base (SB)
Pole can be
tilted down
to ground.

Swing Base (SB)
Pole secured
in raised
position.
   

BB Model: Bolted Base Installation
The BB Model pole is available only as a 2-section, 18 ft. pole. The anchor base is cemented in and the bottom pole section is installed. The above ground height of the BB pole is the same as the pole height number.


Surface Mount
Bolted Base (BB)

 

Additional Flag Poles Specifications: (all dimensions nominal)
Model EB2: Bottom section is 3-1/2” OD x 1/8” wall.
Top section is 2-3/8” OD x 1/8” wall.
Model EB3: Bottom section is 3-1/2” OD x 3/16” wall.
Middle section is 2-7/8” OD x 1/8” wall.
Top section is 2-3/8” OD x 1/8” wall.
Model SB2: Bottom section is 3-1/2” OD x 1/8” wall.
Top section is 2-3/8” OD x 1/8” wall.
Model SB3: Bottom section is 3-1/2” OD x 3/16” wall.
Middle section is 2-7/8” OD x 1/8” wall.
Top section is 2-3/8” OD x 1/8” wall.
Model BB2: Bottom section is 3-1/2” OD x 1/8” wall.
Top section is 2-3/8” OD x 1/8” wall.

 

 
 

 
 

Park Grills | Campfire Rings | Picnic Tables | Park & Street Benches | Trash & Recycling Receptacles
Bike Racks & Parking | Wheelchair Accessible Products | 100% Recycled Products  | Site Amenities
New Products | About Us | Contact Us | How to Order | Price List | Request a Price Quote
GSA Contracts | Request a Catalog | Home



 Designed, maintained
 and hosted by:

Copyright 1996 - 2008 R.J. Thomas Manufacturing Co., Inc.
PO Box 946, 5648 Hwy. 59 South, Cherokee, Iowa, USA 51012-0946
(712)225-5115 ~~ TOLL FREE (800)762-5002 ~~ FAX (712)225-5796
Office Hours: Monday-Friday 8:00 A.M to 5:00 P.M. Central Time

Pilot Rock ® is a registered trademark of R.J. Thomas Mfg. Co., Inc.
www.pilotrock.com ~~ pilotrock@rjthomas.com

 
 
 
R.J. Thomas Mfg. Co. Inc. manufactures a wide selection of Commercial Quality Park, Street and Camp Site Products for parks, campgrounds, recreational areas, playgrounds and landscapes. R.J. Thomas makes Pilot Rock park grills, covered park grills, campfire rings, wheelchair accessible firerings, ground grills, portable park tables, pedestal park tables, recycled plastic park tables, wheelchair accessible tables, park benches, athletic benches, recycled plastic benches, street benches, bicycle racks, skateboard racks, pedestal park grills, picnic tables, trash cans, trash can lids, trash receptacles, waste receptacles, recycling lids, recycling systems, lantern holders, flagpoles, recycled plastic car stops, recycled plastic speed bumps, smoking waste disposal systems and more!
 
Contact Us Request a Price Quote Request A Price Quote Request A Catalog Contact Us