Welcome to our Internet Specials web page. Here
you will find some really special deals on inventory overstocks
and discontinued models for some Pilot Rock products. All of these
items are new, and have never been used. They are NOT factory seconds
or defective or reworked merchandise.
All Internet Special products and pricing are subject to prior
sale. When existing inventory is depleted the Special will no longer
be available. Product selection, availability and pricing are all
subject to change without prior notice. We will keep this web page
as current as we can, but the status is subject to constant flux.
Please check back here often, as other products may be added and
sold products will be deleted.
All prices are F.O.B. our factory. Freight to your destination
will be an additional cost. For a complete price and freight cost
quotation click on Request Price Quotation. Complete the form; enter
your desired quantity and the product model number exactly as shown
below. We will respond with unit pricing and a freight quotation.
After you receive our quotation response you will be able to place
your order online. Or call our Customer Service Dept. at 800-762-5002.
Standard Duty ST Series Picnic Table Frame Kits – Model ST/B-6FR/IS
Model ST Picnic Table Frame Kits are designed for lighter duty service areas where exposure to abuse and the elements are minimized. A strong, durable picnic table with an economical design. Kits include frames and fasteners. Lumber is not included.
Model ST Picnic Tables feature our nontip, nontrip, walk through design. Stable. Won’t tip even if all persons sit on one side. Easy walk through access. “Skid” design permits movement without damage to turf.
All welded 1-1/2" OD steel pipe end frames (1.500" OD, 12 ga. wall, structural steel tube specifications). Top/seat mounting angles are 1-3/4" x 1-3/4" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. All 3/8" dia. galvanized carriage bolt fasteners for 2” x 10” (nom.) top/seat planks are included in each frame kit. Model ST Picnic Table Frame Kits offer 30” nom. table height; 18” nom. seat height. Tables can be 6, 8, 10 or 12 ft. long.
Available only with standard black enamel paint finish.
Internet Special Price:
Model ST/B-6FR/IS: 6 ft. long (2 frames), Weight = 63 lbs. Price = $79.10 each kit.
Model ST/B-8FR/IS: 8 ft. long (2 frames), Weight = 65 lbs. Price = $79.10 each kit.
Model ST/B-10FR/IS: 10 ft. long (3 frames), Weight = 101 lbs. Price = $119.00 each kit.
Model ST/B-12FR/IS: 12 ft. long (3 frames), Weight = 103 lbs. Price = $119.00 each kit.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
8 Ft. Diameter Umbrella – Model UM-8/IS
Model UM-8/IS umbrella is 8 ft. diameter, woven polyester fabric in neutral beige and ivory colors. It features a 1-1/2” diameter aluminum pole, 3 position tilt mechanism and crank for open/close. This is the only color/size/style/pattern available as an Internet Special.
Approximate UPS Shipping Weight: 30 lbs. Per Model UM-8/IS
Internet Special Price: $130.00 per Model UM-8/IS umbrella, plus freight.
Click on Request Price Quotation to get a complete price and freight cost quotation.
7 Ft. Diameter Vinyl Umbrella – Model UM-7/IS
Model UM-7/IS umbrella is 7 ft. diameter, 10 oz. vinyl material, available in red/white alternating color panels only, eight temper steel spring-wire ribs, 1-1/2” OD aluminum pole, crank up/down with galvanized steel cable and nylon runner, three position tilt.
Approximate UPS Shipping Weight: 30 lbs. each.
Internet Special Price: $94.00 per Model UM-7/IS umbrella, plus freight.
Click on Request Price Quotation to get a complete price and freight cost quotation.
Boardloch® Skateboard Security Rack
Model SBFM-105/G/IS
skateboard rack,
flush/wall mount, holds
five skateboards, galvanized finish. |
The Boardloch® brand Skateboard Security Rack is a lockable rack designed to store and secure skateboards and push-type scooters. Patent Pending.
• Each Skateboard Rack will secure up to 5 skateboards or up to 4 scooters. Ideal for schools, recreation areas, community and public buildings, and skate parks.
• The Boardloch® Skateboard Rack is designed to be mounted to a flat concrete or masonry brick wall surface. This installation keeps the skateboards up off the ground and out of the way.
• Simply place the skateboard between two tubes on the rack. Slide the rings found on each tube to the front/top of the tube until they meet. Secure the rings together with a padlock (supplied by the skateboarder).
• Each rack is constructed of heavy gauge steel plate, 1" ID Schl. 40 steel pipe for the tubes, and 3/8" dia. steel bar for the locking rings. Assembled dimensions:
23-3/4" long, 11-3/4" wide, 11" high. Weight 32 lbs.
Ships assembled. (Anchor bolts not included).
• Finish is galvanized/zinc plated.
Approximate Shipping Weight: 36 lbs. per Model SBFM-105/G/IS
Internet Special Price: $204.00 per Model SBFM-105/G-IS, plus shipping costs.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Octagonal Trash Receptacle – Model CN-OC/IS
Model CN-OC/HN-32 trash
receptacle, perforated steel,
green vinyl Plastisol coating |
Model CN-OC/IS receptacle has a 32-gallon capacity. This receptacle is created using 4 angled perforated steel side panels, a base reinforced with cross braces, and an octagonal lid. The lid includes an 8-sided opening. Each piece is coated with vinyl Plastisol. This unit is shipped knocked down to reduce freight costs. Galvanized fasteners included.
The bottom panel keeps the liner off the ground. Anchor holes in cross braces can be used to secure the trash receptacle in place (anchor bolts not included). Optional stationary mounts available. Optional galvanized steel cans or rigid plastic liners are available.
Approximate Shipping Weight: 75 lbs. per Model CN-OC/IS.
Internet Special Price: $174.00 per Model CN-OC/IS receptacle. Buy (6) or more and deduct 10% from unit price.
Order color choice by Model Number:
CN-OC/HR-32/IS = red vinyl coating.
CN-OC/HU-32/IS = blue vinyl coating.
CN-OC/HW-32/IS = brown vinyl coating.
The unit price is the same for all colors.
Note: Optional anchor bolts, stationary mounts and liners are not included.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Cor-Ten Picnic Table Frame Kit: Model CT-FR/IS
Model CT-FR/IS picnic table frame kit
only, includes fasteners, does not
include lumber |
“Cor-Ten” is a naturally “weathering steel”
that seals itself over time. It will weather to a brown colored
finish that does not require maintenance or painting. The top and
seat angles are 3 inches wide with staggered bolt holes to provide
lateral stability when the lumber is bolted on. This design does
not use diagonal braces, but you can add a center brace of 2 in.
x 4 in. lumber under the table top planks if you desire (brace is
not included). This frame kit is designed to use (2) 2 inch x 12
inch (nom.) seat planks, and (3) 2 in. x 10 in. (nom.) top planks.
You supply your own lumber planks and cut them to length to build
a table from 4 ft. to 8 ft. long. All 3/8 inch galvanized carriage
bolts and nuts are included.
Approximate shipping weight: 100 lbs. per Model
CT-FR/IS frame kit.
Internet Special Price: $89.00 per Model CT-FR/IS
frame kit.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Recycled Plastic Car Stops: Model CS-6##/IS
Recycled plastic car stops are available
in 6 lengths and several colors |
These car stops are made from 100% recycled plastic which requires no maintenance and can withstand traffic, weather and salt. A solid color is formed throughout and a UV stabilizer is added. Anchor holes are pre drilled and each car stop includes three ¾ in. diameter pointed anchor stakes. Dimensions: 6-1/4 in. wide at base, 4-1/2 in. tall.
Approximate shipping weight: 53 lbs. per 6 ft. long car stop. 70 lbs. per 8 ft. long car stop.
Internet Special Price: (limited quantities)
(56) units: Model CS-6PA/IS Gray color, 6 ft. = $37.50 each.
(21) units: Model CS-6PW/IS Brown color, 6 ft., = $37.50 each.
(2) units: Model CS-8PA/IS Gray color, 8 ft. = $37.50 each.
Buy (20) or more car stops and deduct 10% from these unit prices.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Classic Bench: Model CLB/G-4HW/IS
Model CLB/G-4HW/IS
Classic Bench kit,
4 ft. long, includes lumber |
Model CLB/G-4HW/IS Park Bench incorporates one-piece welded end
frames; die formed from structural channel for a strong, lightweight
design. Diagonal braces provide support and stability. Portable
design. Frame feet include anchor holes for fixed positioning (anchors
not included). Bench frames are hot dip galvanized after fabrication
for maximum protection from weather. This bench is 4 feet long.
The seat and back lumber is 3/4" x 2-1/2" redwood stained
hardwood slats. All galvanized fasteners are included. This bench
is shipped knocked down, assembly required.
Approximate shipping weight: 42 lbs. per Model
CLB/G-4HW/IS bench kit.
Internet Special Price: $89.00 per Model CLB/G-4HW/IS
bench kit.
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Steel Strap Bench – Model BC-M6-BCH/CB/IS
6 ft. long bench features: all steel, welded fabrication, 1/8” x 2” steel straps rolled over 1” tube, 1-1/4” sq. tube frame legs and arms, 1” sq. tube frame brace; ships fully assembled; Black powder coat finish; can be surface mounted with anchor holes in frame feet (anchor kit included).
Only (2) Benches available.
Approximate shipping weight: 115 lbs. per Model BC-M6-BCH/CB/IS.
Internet Special Price: $669.00 per Model BC-M6-BCH/CB/IS
Click on Request Price Quotation to get a complete price and freight
cost quotation.
Nylon Recycling Bags
Left: Model CN-55NRB/IS nylon recycling bag
for use in 55-gallon receptacle holders
Right: Model CN-32NRB/IS nylon recycling
bag for use in 30-32 gallon receptacle holders |

When the recycling bag is full, pull the draw cord to close
the bag, lift it out of the receptacle holder, and replace
it with an empty bag for more collection of cans or bottles |
These durable nylon recycling bags can be used inside a trash receptacle
holder as an alternative to heavy trash cans and barrels. These
light weight, but strong bags can be used for easy collection of
recyclables such as cans and bottles. When the bag is full, pull
the draw cord closed and remove the bag. Then replace it with an
empty bag. It is easy to carry additional replacement bags.
The cylindrical recycling bags are fabricated from 10-oz. vinyl
coated nylon tarp with double stitching on all seams. The 175 lb.
strength nylon draw cord is threaded through non-rusting brass grommets.
S-hooks are included to hang the bag inside the trash receptacle
holder. Each bag includes drain holes in the bottom to let liquids
out and to allow easy cleaning.
Colors may vary. No choice of color.
Model CN-32NRB/IS: 23” diameter x 25”
tall, for use in 30-32 gallon receptacles.
Internet Special Price: $10.00 each. Weight 1 pound.
Model CN-55NRB/IS: 26” diameter x 31”
tall, for use in 55 gallon receptacles.
Internet Special Price: $11.00 each. Weight 1 pound.
Buy (25) or more bags (in any combination of sizes) and deduct 15% from the unit prices.
Click on Request Price Quotation to get a complete price and freight cost quotation.
Dual Plastic Liner
Model CN-LD55 is a pair of 26-gallon capacity
rigid plastic liners for use in larger 55-gallon receptacle
holders |
This dual liner fits inside 55-gallon barrels or other similarly
sized trash and recycling receptacle holders. The pair is designed
to allow you to collect two types of recyclables in one container.
The Model CN-LD55 comes as a set of two rigid plastic liners, 26-gallon
capacity each. Use them as a pair, or separately pushed up against
a wall to serve as individual trash or recycling receptacles. No
color choice.
Model CN-LD55/IS: approximate shipping weight:
15 lbs. per pair.
Internet Special Price: $24.00 per pair. |