Ash Receptacles match in style and design the TRH round and TRQ square trash and recycling receptacles. Coordinate both smoking waste and trash collection with matched receptacles.

• Rugged construction for outdoor use – welded steel frame rings with hot dip galvanized finish.

• Slats are 2” x 4” (nom.) treated pine or 100% recycled plastic available in choice of colors (see Material Options).

• Ash Receptacle can stand alone, be bolted to the surface, or be mounted in place with optional posts (see below).

• Large capacity aluminum sand bowl is cabled to receptacle – it can be removed for cleaning but not stolen.

• Deep sand bowl helps protect sand from the wind.

• Includes 8 lb. bag of sand to fill bowl about two-thirds full (2” deep).

Model TRH/G-ASH/TP24 round ash
receptacle with treated #1 southern
yellow pine slats. (Shown next to Model
TRH/G-32TP24 trash receptacle holder.)

Model TRQ/G-ASH/PW24 square ash
receptacle with brown 100% recycled
plastic slats. Shown on optional Model
M11/G surface pedestal mount.

Model CN-AMR/CW-ASH round ash
receptacle, brown powder coat finish.

Model CN-AMQ/CB-ASH square ash
receptacle, black powder coat finish.

Ash Receptacles match in style and design the Amherst AMR round and AMQ square trash receptacles. Coordinate both smoking waste and trash collection with matched receptacles.

• Rugged construction for outdoor use – all steel welded fabrication mirrors the specifications of the full-size Amherst trash receptacles.

• Powder coat finish is available in choice of colors (see Material Options). The style and color can also coordinate with several steel bench designs.

• Ash Receptacle can stand alone, be bolted to the surface, or be mounted in place with optional posts (see below).

• Large capacity aluminum sand bowl is cabled to receptacle – it can be removed for cleaning but not stolen.

• Deep sand bowl helps protect sand from the wind.

• Includes 8 lb. bag of sand to fill bowl about two-thirds full (2” deep).

Pedestal Mounts for Ash Receptacles

• Supports ash receptacle 8” above ground.

• Both Models fit TRH-ASH, TRQ-ASH, AMR-ASH and AMQ-ASH round and square ash receptacles.

• Hot dip galvanized finish is standard. Painted finishes are available.

Surface Pedestal Mount
Model M11/G: A 1.90” OD x 11 ga.
steel tube post is welded to the 10 ga.
steel formed mounting plate. This plate
has four 7/16” bolt holes to match to a
similar plate in the bottom of each ash
receptacle. The post includes a
¼” x 8” x 8” square base plate to
be anchored to surface (anchor bolts
not included).

Embedded Pedestal Mount
Model M10/G: A 1.90” OD x 11 ga.
steel tube post is welded to the 10 ga.
steel formed mounting plate. This plate
has four 7/16” bolt holes to match to a
similar plate in the bottom of each ash
receptacle. The post is embedded
into a concrete footing.