Stationary Mounts for Trash Receptacles | Pilot Rock: Garbage Cans, Trash Containers, Recycling

Ground Level Stationary Mounts

Model M1G: Strap Anchor Mount for ground level installation. A 10 ga. x 2" wide, “U” shaped, galvanized steel strap bolts to base ring and is embedded into a concrete footing. Trash Receptacle is supported by base ring. Model M1/G fits: all TRH’s, all TRQ’s, CN-R/R-32, CN-R/D-32, CN-R/SP2-32, CN-Q/D-32/2, CN-AMR, CN-AMQ, CN-R/SS2-36, CN-R/SS3-36, CN-R/R-52, CN-R/D-52, CN-R/R-55, CN-R/D-55.	Model M6/B: Seasonal Anchors for ground level installation. Four black enamel (/B) steel rods install through holes in cross braces of bottom frame ring and into ground. Allows for relocation of trash receptacle. Model M6/B fits: all TRH’s, all TRQ’s, CN-R/R-32, CN-R/D-32, CN-R/SP2-32, CN-Q/D-32/2, CN-AMR, CN-AMQ, CN-EXP52, CN-R/SS2-36, CN-R/SS3-36, CN-R/R-52, CN-R/D-52, CN-R/R-55, CN-R/D-55, CN-OC.	Surface Anchoring: TRH and TRQ trash receptacle base frames include (3) or (4) 9/32" dia. holes in flange to allow anchoring to a concrete surface with appropriate anchors. Anchor bolts are not provided. Use 1/4" x 2-1/4" concrete screws. Note: Use some size anchors for TRH-ASH and TRQ-ASH receptacles and P10 planters.

Pedestal Mounts for Elevated Installation
	Embedded Pedestal Mount Supports trash receptacle holders 8" above ground. Model M2/G has 3 cross arms and fits TRH-32, TRQ-32, CN-R/R-32, CN-R/D-32, CN-R/SS2-36, CN-R/SP2-32, CN-Q/D-32/2, CN-OC, CN-R/SS3-36 Model M4/G has 3 cross arms and fits TRH-20. Model M8/G has 4 cross arms and fits TRH-55, CN-AMR, CN-AMQ, CN-R/D-52, CN-R/D-55, CN-R/R-52, CN-R/R-55. A 2-3/8" OD steel pipe base post, welded to structural steel angle cross arms, bolts to the cross braces in the base ring of the trash receptacle holder (fasteners included). The post is embedded into a concrete footing. All models are standard with a hot dip galvanized finish (/G). An optional powder coat finish is available.

	Surface Pedestal Mount Supports trash receptacle holders 8" above ground. Model M3/G has 3 cross arms and fits TRH-32, TRQ-32, CN-R/R-32, CN-R/D-32, CN-R/SS2-36, CN-R/SP2-32, CN-Q/D-32/2, CN-OC, CN-R/SS3-36 Model M5/G has 3 cross arms and fits TRH-20. Model M7/G has 4 cross arms and fits TRH-55, CN-AMR, CN-AMQ, CN-R/D-52, CN-R/D-55, CN-R/R-52, CN-R/R-55. A 2-3/8" OD steel pipe base post, welded to structural steel angle cross arms, bolts to the cross braces in the base ring of the trash receptacle holder (fasteners included). The post includes a 1/4" x 8" x 8" square base plate to be anchored to surface (anchor bolts not included). All models are standard with a hot dip galvanized finish (/G). An optional powder coat finish is available.

Pedestal Mounts for Ash Receptacles

• Supports ash receptacle 8” above ground.

• Both Models fit TRH-ASH, TRQ-ASH, AMR-ASH and AMQ-ASH round and square ash receptacles, CN-R/SS3-ASH

• Hot dip galvanized finish is standard. Painted finishes are available.

Surface Pedestal Mount
Model M11/G: A 1.90” OD x 11 ga.
steel tube post is welded to the 10 ga.
steel formed mounting plate. This plate
has four 7/16” bolt holes to match to a
similar plate in the bottom of each ash
receptacle. The post includes a
¼” x 8” x 8” square base plate to
be anchored to surface (anchor bolts
not included).

Embedded Pedestal Mount
Model M10/G: A 1.90” OD x 11 ga.
steel tube post is welded to the 10 ga.
steel formed mounting plate. This plate
has four 7/16” bolt holes to match to a
similar plate in the bottom of each ash
receptacle. The post is embedded
into a concrete footing.