Channel Park Bench - Using Lumber
Installation / Mount
MATERIAL & LENGTH CHOICES
The Channel Bench is designed to be stronger and more stable with a simple, clean design. The benches are available with stationary and portable installation options.
Coordinates with TRH Trash and Recycling Receptacles and Model P-10 Planters.
FRAME: All welded steel frame construction: seat/back support channel is die-formed from 1/8" thick (11 ga.) steel; frame posts and portable foot are fabricated from 2-3/8" OD steel pipe.
FINISH: Hot dip galvanized finish after fabrication maximizes protection from the elements. Or select a powder coat paint finish in your color choice.
INSTALLATION: Model PCXB is portable/surface mount so it can sit on the ground or be anchored to a hard surface. The frame foot includes 9/16” diameter holes for anchor bolts (not included). Use Model ANC3-4 Anchor Kit for 4', 6' or 8' bench. Use Model ANC3-6 Anchor Kit for 15' bench. Model SCXB is stationary/embedded mount with frame posts in concrete footings.
LENGTH: Channel Park Bench can be 4, 6 ,8 or 15 feet long using lumber planks.
SEAT & BACK MATERIALS: 2" x 4" (nom.) lumber. Note: 15 ft. long benches use 2" x 10" (nom.) size planks. See Material Options.
OPTIONAL: Armrests can help make bench more accessible. See Accessories/Armrests for Park Benches.
OPTIONAL: Custom Plastic laminate plaques are available on lumber. See Accessories.
OPTIONAL: Cover Caps, two-part aluminum caps to cover bottom of frame post for Model SCXB benches with embedded post. Depending on the length of your bench you may need 2, 3, 4 or 5 cover caps per bench. The natural cast aluminum finish will match a hot dip galvanized frame finish. Or the caps will be powder coated to match the frame finish. Click here to add Cover Caps to your Quote Cart.
California's Proposition 65.