FA-30/18 Campfire Ring

View Description

Model: FA-30/18

Configure Product

Campfire Ring Side Heights

Choose your campfire ring side height.
Material Options

Campfire Ring Anchor Systems

Choose your desired anchor system configuration
Material Options

Campfire Ring Shelf Options

Material Options

Campfire Ring Heat Shields

Select an optional heat shield for your campfire ring. NOT AVAILABLE on rings less than 9" tall.
Material Options

Product Description

Series Overview

The FA-30/18/PA Series Campfire Rings combine our original Infinitely Adjustable cooking grate with our flanged fire ring – a practical design combination for campfire control and convenient outdoor cooking.

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

The 270 sq. inch cooking grate is Infinitely Adjustable vertically from below the top of the fire ring to 7-3/4" higher.  This cantilevered grate is structurally reinforced to resist hard use and vandalism.  The cooking grate can be lifted over and out of the campfire ring, but remains permanently attached.

The FA-30/18/PA features a 30” inside diameter and a side height of 16-3/8”, providing for a more comfortable working height.  The elevated design allows placement flexibility because the aggregate fill (not included) protects existing surfaces such as pavers, asphalt and concrete.  This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas.

FA-30/18/PA Series fire rings include pin anchors (/PA) to keep the campfire ring secured in one place.  These pins must be set in concrete and do not allow the ring to tip back.

Cooking grate adjustment handles, made from 3/4" dia. steel, are turned outside of the fire ring, away from the fire.  The handle grips are 1/8" x 1/2" coiled steel bar.  The cooking grate is built using 5/8" dia. steel perimeter bars and 1/2" dia. steel grate bars. All grate bars are welded on both sides.

OPTIONAL: S-5 bolt-on utility shelf

OPTIONAL: Heat Shield (add /H to end of model number)

 California's Proposition 65.

Website design and development by Spindustry Digital, Des Moines, Iowa