Pilot Rock RJ Thomas Mfg. Co.

Snow Load/ Extreme Load Heavy Duty Accessible Picnic Table - XT Series

Please make the following configuration choices:

Standard Height Or Raised Top Table

Choose if you want the standard height table top or a raised top for additional wheelchair clearance under the top.

($36.00)

Frame Finish

Select the finish you want on the frames.

MATERIAL & LENGTH CHOICES

Select the Material and Length you want for this product.

($1,454.00)
($1,486.00)
  • Price Per Unit Starts At:
    $1,454.00

Model XT and XTH End Accessible Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required and to withstand high elevation snow and other extreme loads when equipped with our V-Type expanded steel or H-Type perforated steel top/seats.  With a 2 ft. extension of the table top on one end, these tables meet or exceed current ADA guidelines for wheelchair accessibility.

Snow Load Rated TablesSpecifications:

Model XT Picnic Tables feature our non-tip, non-trip, walk-through design. The table won’t tip even if all persons sit on one side. Easy walk-through access. “Skid” design permits movement without damage to turf. Model XT Picnic Tables offer 30" nom. table height; 18" nom. seat height.

Model XT End Access Picnic Tables offer 30" nom. table height (to top of table); 18" nom. seat height.

Model XTH End Access Picnic Tables offer 31" under table clearance to allow most wheelchair armrests to fit under it for a closer approach; 19" nom. seat height.

LOAD RATING:  The Model XT-/E and Model XTH-/E tables have been designed to withstand extremely heavy loads.  They have been independently tested by an independent lab and a state university and are rated to withstand weight loads up to 948 lbs. per sq. ft.  In order to achieve that rating, they must be equipped with our V-Type expanded steel or H-Type perforated steel top and seat structures.  Remember...the rating is 948 lbs. per square foot NOT per table!

FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications).  Top/seat mounting brackets are 2" x 2" x 10 ga. die-formed steel angles.  Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel.  All 3/8" dia. galvanized carriage bolt fasteners.  Warranted for life.

FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your color choice.

LENGTH: 8 ft. long table top with 6 ft. long seats. 

TOP/SEAT MATERIALS:  Our V-Type 3/4-#9 expanded metal or H-Type 14 ga. perforated steel  thermo-plastic coated in your choice of color.  See Material Options.

OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).

You May Also Like

Campfire Rings
FSW/SL-30 SNOW LOAD Rated Swivel Grate Campfire Ring
FSW/SL-30 SNOW LOAD Rated Swivel Grate Campfire Ring
SKW: FSW/SL-30
This Campfire Ring features a swivel grate that is snow load rated to 569 lbs. per sq. foot
Accessories
Heat Shield for Picnic Table Top
Heat Shield for Picnic Table Top
SKW: HS-TB/G
Protect Picnic Table Tops from Hot Grills and Pots.
Trash & Recycling Receptacles
Round Receptacle - Expanded Steel
Round Receptacle - Expanded Steel
SKW: CN-R
Fabricated using expanded steel and available in 3 sizes.
Website design and development by Spindustry Digital, Des Moines, Iowa