Snow Load/Extreme Load Traditional A-Frame Picnic Table - WAT Series

View Description

Model: WAT

Configure Product

Frame Finish

Select the finish you want on the frames.
Material Options


Select the Material and Length you want for this product.
Material Options

Product Description

Series Overview

Model WAT-8 Picnic Tables incorporate galvanized steel braces for a stronger A-frame design.  This is your traditional A-frame table modified to withstand public and commercial use.  Designed to meet the challenges of high elevation snow and other extreme loads, additional steel braces under the seats and top provide a Snow Load Rating of 500 lbs. per sq. ft.

These picnic tables have 8 ft. recycled plastic tops and seats.  The design meets or exceeds current ADA guidelines for wheelchair accessibility and provides for wheelchair access at both ends (30" wide, 27" under table top and 19" knee plus 5" toe clearances).

Snow Load Rated Tables Specifications:

  Designed to withstand extremely heavy loads.  They have been independently tested by an independent lab and a state university and are rated to withstand weight loads up to 500 lbs per sq. ft.  This rating is achieved by including additional steel braces under the seats and top.  Remember...the rating is 500 lbs. per sq. ft. NOT per table!

FRAMES:  4” x 6” (nom.) leg posts.  Cross supports are formed using galvanized steel channel to build rigid end frames and a sturdy seat support.  Frames are supported by diagonal braces of 1-5/16” OD galvanized steel pipe attached to a steel center channel under the table top.  All 3/8” dia. galvanized carriage bolts (not lag screws) are provided for assembly.

LENGTH:  8 ft. table top and 8 ft. seats.

TOP/SEAT MATERIAL:  2” X 10” (nom.) 100% Recycled Plastic planks in your choice of color.  See Material Options.

OPTIONAL: Attach to surface for permanent installation with optional anchor brackets.  Use Model ANG-2 Angle Anchor Kit.

Website design and development by Spindustry Digital, Des Moines, Iowa