AT Series - Traditional A-Frame Picnic Table - Using Lumber

View Description

Model: AT

Configure Product


Select the Material and Length you want for this product.
Material Options

Product Description

Series Overview

Model AT Picnic Tables incorporate galvanized steel braces for a stronger A-frame design. This is your traditional A-frame table modified to withstand public and commercial use. 


  4” x 6” (nom.) leg posts are treated pine.  Cross supports are formed using galvanized steel channel to build rigid end frames and a sturdy seat support.  Supported by diagonal braces of 1-5/16” OD galvanized steel pipe attached to a steel center channel under the table top.  All 3/8” dia. galvanized carriage bolts (not lag screws) are provided for assembly.

LENGTH:  6 or 8 ft. long using 2 frames or 12 ft. long using 3 frames.

TOP/SEAT MATERIAL:  2” X 10” (nom.) pressure treated #1 southern yellow pine.  See Material Options.

OPTIONAL: Attach to surface for permanent installation with optional anchor brackets.  Use Model ANG-2 Angle Anchor Kit.

Website design and development by Spindustry Digital, Des Moines, Iowa