AT Series - Traditional A-Frame Picnic Table - Using Recycled Plastic

View Description

Model: AT

Configure Product

Frame Finish

Select the finish you want on the frames.
Material Options


Select the Material and Length you want for this product.
Material Options

Product Description

Series Overview

Model AT Picnic Tables incorporate galvanized steel braces for a stronger A-frame design. This is your traditional A-frame table modified to withstand public and commercial use. 


  4” x 6” (nom.) leg posts are 1005 reycled plastic.  Cross supports are formed using galvanized steel channel to build rigid end frames and a sturdy seat support.  Supported by diagonal braces of 1-5/16” OD galvanized steel pipe attached to a steel center channel under the table top.  All 3/8” dia. galvanized carriage bolts (not lag screws) are provided for assembly.

LENGTH:  6 or 8 ft. long

TOP/SEAT MATERIAL:  2” X 10” (nom.) 100% Recycled Plastic planks in your choice of color.  See Material Options.

OPTIONAL: Attach to surface for permanent installation with optional anchor brackets.  Use Model ANG-2 Angle Anchor Kit.

Website design and development by Spindustry Digital, Des Moines, Iowa