Campfire Ring Heat Shields
An optional welded-on Heat Shield is available on some Pilot Rock campfire rings. This welded-on shield can be added to new Pilot Rock campfire rings to give protection from hot surfaces around the outside of the ring. The 10 ga. x 8" high Shield provides a 7/8" air gap around the area of these tall fire rings exposed to heat (the lower portion of these fire rings is filled with aggregate). Any debris that might get between the campfire ring and the Shield will fall out the open bottom.
NOTE: Not available on campfire rings less than 11 inches tall.
OPTIONAL: Bolt-on utility shelf Model S-5 (See Utility Shelf).
Note on Accessibility: Current ADA guidelines define the space around campfire rings to provide 48 inches of clearance. Exceptions can reduce this clearance to 36 inches. In these tighter clearances a Heat Shield could provide an added level of safety.