TRH Series - Trash and Recycling Receptacles
Receptacle Capacity, Material, Color
Series TRH Trash Receptacles are an attractive way to collect trash or recyclables while disguising and protecting the liner inside from abuse and vandalism.
Series TRH Trash Receptacles are available in two sizes:
Model TRH-32 (22-3/8" ID) holds a 31- or 32- gallon capacity can or liner.
Model TRH-55 (25-3/8" ID) holds a 55-gallon barrel or liner.
This series also has coordinating Ash Receptacles and Planters for a cohesive appearance.
FRAMES: TRH Series frames include a top and bottom ring; both rolled using 10 ga. steel with a formed flange for strength. The base ring is reinforced with die-formed cross braces. These braces also serve to keep the container inside the TRH up off the ground. Galvanized fasteners included. The base frames include (3 or 4) 9/32" dia. holes in flange to allow anchoring to a concrete surface with appropriate anchors. (Anchor bolts are not included-use 1/4" x 2-1/4" concrete screws).
FRAME FINISH: Standard finish: Hot dip galvanized after fabrication for maximum protection. Or choose power coated (in place of galvanized finish) in your choice of color. See Material Options.
MATERIALS: 2"x 4" slat material: pressure treated #1 southern yellow pine OR 100% recycled plastic slats available in choice of colors. See Material Options.
OPTIONAL: A variety of steel and plastic dome and flat lids are available for this receptacle to collect trash and recyclables. See Receptacle Lids.
OPTIONAL: Stationary mounts are available. See Stationary Mounts.
OPTIONAL: Galvanized steel cans or rigid plastic liners are available. See Trash Cans, Liners.
OPTIONAL: Custom engraving is available on recycled plastic slats. See Accessories.