Model XT Side Accessible Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required. A section of seating is removed from the side(s) for ADA COMPLIANT wheelchair accessibility right in the middle of activities. Table configurations meet or exceed current ADA guidelines for wheelchair access to picnic tables.
Model XT Side Accessible Picnic Tables feature our non-tip, non-trip, walk through design. The table won’t tip even if all persons sit on one side. Easy walk through access. “Skid” design permits movement without damage to turf.
Model XT 6 and 8 ft. Side Access Picnic Tables provide one side opening with 2 one-person seats located on either side of wheelchair. These tables can comfortably seat 6-7 people.
Model XT 10 ft. Side Access Picnic Tables provide two locations for wheelchairs which are diagonally opposite each other. Current ADA guidelines require two wheelchair spaces on these larger tables. Each side includes a shorter one-person seat plus a longer seat to accommodate 3-4 people. These tables can comfortably seat 10-12 people.
Model XT Side Accessible Tables offer 30” nom. table height (to top of table); 18” nom. seat height. Diagonal braces are used to support and reinforce the table structure. Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe).
FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications). Top/seat mounting brackets are 2" x 2" x 10 ga. die-formed steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. The 10 ft. tables using recycled plastic use 4 frames. All 3/8" dia. galvanized carriage bolt fasteners. Warranted for life.
FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your color choice.
LENGTH: 6, 8, or 10 ft. lengths.
TOP/SEAT MATERIALS: 2” X 10” (nom.) 100% Recycled Plastic planks in your choice of color. See Material Options.
OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).