Snow Load/ Extreme Load Heavy Duty Picnic Table - XT Series

View Description

Model: XT

Configure Product

Frame Finish

Select the finish you want on the frames.
Material Options


Select the Material and Length you want for this product.
Material Options

Product Description

Series Overview

Model XT Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required and to withstand high elevation snow and other extreme loads when equipped with our V-Type expanded steel or H-Type perforated steel top/seats.  When the snow melts, these tables will be ready for use!

Snow Load Rated Tables Specifications:

Model XT Picnic Tables feature our non-tip, non-trip, walk-through design.  The table won’t tip even if all persons sit on one side.  Easy walk-through access.  “Skid” design permits movement without damage to turf. Model XT Picnic Tables offer 30" nom. table height; 18" nom. seat height.

LOAD RATING:  The Model XT tables have been designed to withstand extremely heavy loads.  They have been independently tested by an independent lab and a state university and are rated to withstand weight loads up to 1420 lbs. per sq. ft.  In order to achieve that rating, they must be equipped with our V-Type expanded steel or H-Type perforated steel top and seat structures.  Remember...the rating is 1420 lbs. per square foot NOT per table!

FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications).  Top/seat mounting brackets are 2" x 2" x 10 ga. die-formed steel angles.  Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel.  All 3/8" dia. galvanized carriage bolt fasteners.  Warranted for life.

FINISH: Standard finish: hot dip galvanized after fabrication.  Or choose a powder coat finish (in place of galvanized finish) in your color choice.

LENGTH: Tables can be 6, 8 or 10 ft.

TOP/SEAT MATERIALS:  Our V-Type 3/4-#9 expanded metal or H-Type 14 ga. perforated steel  thermo-plastic coated in your choice of color.  See Material Options.

OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).

Website design and development by Spindustry Digital, Des Moines, Iowa