FS-48 Campfire Ring
Campfire Ring Side Heights
Campfire Ring Anchor Systems
Campfire Ring Shelf Options
The FS Series Campfire Rings combine a single level cooking grate with our flanged fire ring – an economical design when cooking over the fire might be a lower priority.
Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge. This flange provides extra strength against heat warpage and eliminates a vertical edge. Draft holes are provided for fire ventilation.
290 sq. inch single level cooking grate is hinged to the campfire ring and remains permanently attached.
Model FS-48 Series Campfire Ring features a 46” inside diameter and is available in three different side heights of 7-3/8”, 9”, and 11-3/8”.
FS Series fire rings include pin anchors (/PA) to keep the campfire ring secured in one place, but do not allow for tip back. These pins must be set in concrete.
Cooking grate adjustment handles, made from 3/4" dia. steel, reach outside of the firering, away from the fire. The handle grips are 1/8" x 1/2" coiled steel bar. The cooking grate is built using 5/8" dia. steel perimeter bars and 1/2" dia. steel grate bars. All grate bars are welded on both sides. The grate hinges are formed using 5/8" dia. steel bar.
OPTIONAL Anchor System:
Angle Spade Anchors (/AL) are 4 spades attached around the firering and buried in the ground. The firering cannot be tipped up.
OPTIONAL: Model S-5 Bolt-on utility shelf
California's Proposition 65.