Pilot Rock RJ Thomas Mfg. Co.

Internet Specials

Browse our special deals on inventory overstocks and discontinued models from our Pilot Rock products. All of these items are new, and have never been used. They are not factory seconds, defective, or reworked merchandise.

All Internet Special products and pricing are subject to prior sale. When existing inventory is depleted, the special will no longer be available. Product selection, availability, and pricing are all subject to change without prior notice. We keep our Internet Specials up-to-date, but product status is subject to constant flux.

All prices are F.O.B. our factory. Freight to your destination will be an additional cost. For a complete price and freight cost quotation, fill out a Quick Quote form using the model numbers below. We will respond with unit pricing and a freight quotation. After you receive our quotation response, you will be able to place your order online, or contact customer service


Series GBA Gibraltar Bench

The Gibraltar Bench is a traditional looking bench with
ornate cast aluminum frames. It is portable by design but can be anchored to a hard surface if desired. The frames are powdered coated in your color choice. This bench can be 4, 6 or 8 feet long. Seat/back materials include lumber and recycled plastic.
NOTE: Only a limited quantity of frames are still available. This bench design is being discontinued when the current inventory is sold.

Buy a Complete Bench: Configure your own bench selecting length. materials and colors. CLICK HERE.

Buy Just the Frame Kit: Buy the frame kit and supply your own lumber. CLICK HERE.
 


Model PCXB/G-4PU24/IS Portable Bench with Blue Plastic Planks.

Frame: All welded steel frame construction: seat/back support channel is die-formed from 1/8" thick steel; frame posts and portable foot are fabricated from 2-3/8" OD steel pipe. All holes are pre-drilled, all fasteners are included.
Finish: Hot dip galvanized finish after fabrication maximizes protection from the elements.
Installation: Model PCXB is portable/surface mount so it can sit on the ground or be anchored to a hard surface.  The frame foot includes 9/16” diameter holes for anchor bolts (not included).  Use Model ANC3-4 Anchor Kit for 4' bench.
Length: Model PCXB/G-4PU24/IS Bench is
4 feet long.
Seat & Back Material: 2" x 4" (nom.) 100%
recycled plastic planks in Blue color.

Model: PCXB/G-4PU24/IS
Weight: 91 lbs. each.
Freight Cost: Will be estimated when you submit
the Quick Quote Price Quotation form.
Internet Special Price: $290.00 EACH plus freight.


Model WMB/G-4PU24/IS Wall Mount Bench with Blue Plastic Planks.

Frame: Each wall bracket is 10 ga. formed and welded steel channel.
Finish: Hot dip galvanized finish after fabrication maximizes protection from the elements.
Installation:  The Bench includes galvanized fasteners to attach the seat planks to the frame.  But it does not include wall anchors (each bracket includes three 7/16" dia. wall anchor holes).  Use anchors appropriate to your wall surface.
Length: Model WMB/G-4PU24/IS Bench is
4 feet long.
Seat Material: (3) pieces 2" x 4” (nom.) 100%
recycled plastic planks in Blue color. The
assembled seat will be approximately 11” wide.

Model: WMB/G-4PU24/IS
Weight: 36 lbs.
Freight Cost: Will be estimated when you
submit the Quick Quote Price Quotation form.
Internet Special Price: $117.00 EACH plus freight.


Model T-2410R Round Steel Lid with Rain Cover

Model T-2410R/IS Round Steel Lid is fabricated using 16 ga. formed steel and offers a 12" diameter welded-on rain cover over the hole.  Inside Diameter: 24 inches; Outside Diameter: 24-1/8 inches. A very limited supply of these lids is available.

Note: For all lids, please confirm the inside diameter (I.D.) will fit the outside diameter of your receptacle.  Some lids may fit more closely than others.

Finish: They are available with a powder coat paint finish in your choice of colors. Click here for colors.

Model: T-2410R/IS
Weight:
12 lbs. each
Freight Cost: Will be estimated when you submit the Quick Quote Price Quotation form.
Internet Special Price: $107.00 EACH

Model
Number

I.D.

O.D.

Use With These Receptacle Holders

   T-2410R
  

24"

24-1/8"

 TRH-32, TRH-55 (fits on barrel inside), CN-EXP52,
 CN-AMR-32, CN-R/R-32, CN-R/D-32, CN-R/SS2-36,
 CN-R/SS2-36D, CN-TR-52, CN-R/SP2-32, CN-R/SS3-36, RA's


B302 Team Bench with Equipment Deck

Model B302 Team Bench provides a place for the players and a place for all their gear.  Our B300 Series Team Bench includes a wide equipment deck to handle all the gear and supplies teams bring with them.  Each bench uses 2” x 10” (nom.) seat and backrest planks for the team, plus a 20” wide (2 planks) full length deck behind the bench for stowing equipment bags and gear.

Each frame unit is fabricated using 2-3/8” OD steel pipe, die-formed to create a wide and stable base.  The seat, backrest and deck brackets are 2-3/8” x 1-1/2” x 1/8” thick steel channel.  All components are welded into a single unit for easy assembly.

FRAME FINISH: A hot dip galvanized finish only.
LENGTH: Model B302: 6 or 8 ft. long only (with two frames).
SEAT, BACK & DECK MATERIALS: Clear anodized aluminum bench and deck planks. Or pressure treated #1 southern yellow pine.

Buy frame kits only:

6 Ft. Frame Kit Only Model: B302/G-6FR/IS.  B302 Team Bench Frame Kit Only
8 Ft. Frame Kit Only Model:
B302/G-8FR/IS.
You provide your own seat/back/deck material.
Weight: 68 lbs. per frame kit.
Freight Cost: Will be estimated when you submit the Quick Quote Price Quotation form.
Internet Special Price: $156.00 per frame kit, 6 or 8 ft., plus freight.

Or you can buy complete benches in 6 ft. or 8 ft. lengths:

6 ft. Bench complete with treated pine planks.
Model: B302/G-6TP21/IS.

Weight: 137 lbs.
Internet Special Price: $319.00 each, plus freight.

8 ft. Bench complete with treated pine planks.
Model: B302/G-8TP21/IS.

Weight: 160 lbs.                                                           
Internet Special Price: $375.00 each, plus freight.

6 ft. Bench complete with aluminum planks.   
Model: B302/G-6AL/IS.

Weight: 116 lbs.
Internet Special Price: $660.00 each, plus freight.

8 ft. Bench complete with aluminum planks.
Model: B302/G-8AL/IS.

Weight: 132 lbs.
Internet Special Price: $827.00 each, plus freight.
 


Universal Access Picnic Table Frame Kit

Model WUTH Picnic Table Frame Kits are ADA COMPLIANT and accessible to wheelchairs at both ends—they meet or exceed current ADA guidelines for wheelchair access to picnic tables.  Full length seats offer full capacity seating which is an advantage over extended top or side access tables. 

The WUTH Series frame kit offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe).  Nominal seat height is 19”.  The raised table top allows most wheelchair armrests to fit under it for a closer approach which is an advantage for some persons in wheelchairs and persons with certain physical restrictions.

FRAME KIT ONLY: All welded 1-5/8” OD steel pipe (1.660" OD, 11 ga. wall, 1-1/4” ID nom. pipe specifications).  Top/seat mounting brackets are 2” x 2” x 10 ga. die-formed steel.  Frames are supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel.   Frames are welded into a single piece structure for strength and easy assembly.   All 3/8” dia. galvanized carriage bolt fasteners for frame assembly and lumber attachment are included. Includes table top boards alignment end caps.  Warranted for Life.

Limited Supply: Availabilty is limited to the remaining inventory.  When they are sold we won't make any more.Lumber is not included with Model WUTH/G-8FR/IS.

Model: WUTH/G-8FR/IS. This frame kit will build an 8 ft. long universal access picnic table.
Frame Finish: Hot dip galvanized after fabrication.
Weight: 123 lbs. per frame kit.
Freight Cost: Will be estimated when you submit the Ouick Quote Price Quotation form.
Internet Special Price: $201.00 each frame kit, plus freight.

NOTE: Price does NOT include any top and seat materials. You will need to provide your own 2x10”x8’ lumber, or purchase your choice of top/seat materials from us.


Trash Can Hanger Post

Model CH/G-4/IS Trash Can Hanger provides support for up to 4 steel trash cans (not included).
The central post  is 1-7/8" OD steel pipe.  Installation into a concrete footing is required. The steel hooks for the trash can handle and the can bottom supports are welded to adjustable collars.  The set screws in these collars allow you to adjust their positions to accommodate cans of various capacities and styles.
Model: Use model number CH/G-4/IS
Finish: Hot dip galvanized finish only.
Weight: 15 lbs. each.
Shipment: A small order will ship by UPS. Larger orders will ship by common carrier.
Freight Cost: Will be estimated when you submit the Quick Quote Price Quotation form.
Internet Special Price: $43.00 each plus freight.
Note: The steel trash cans are NOT included.



Flat Bench – 100% Recycled Plastic

RBF/N-6C24 Plastic Bench


This RBF Series flat bench has frames molded from 100% recycled plastic materials. Limited Quantity Available.
Model Number: RBF/N-6C24/IS
Frames: Green color only.
Seat Planks: 2x4” (nom.) Cedar color only.
Not Assembled: All holes are pre-drilled. Includes stainless steel screws for assembly.
Weight: 129 lbs.
Shipment: A single bench can ship UPS in two packages. Multiple benches will ship by truck freight.
Freight Cost: Will be estimated when you submit the Quick Quote Price Quotation form.
Internet Special Price:  $267.00 + freight.
 


Streetscape Trash Receptacle – (with Flat Lid or Dome Lid and Liner)

Streetscape Trash Receptacle

Model Number: CN/CN-M3601-FT/IS (photo above)
Trash receptacle features flat steel bar construction, with a reinforcing steel tube encircling the top. Single piece, all welded construction. Ships fully assembled. 36 gallon capacity. Trash Receptacle kit includes: heavy rigid plastic liner, a cable anchor to secure lid to receptacle, a set of concrete anchors to bolt receptacle to surface, built in leveling feet, and a flat lid. New, in a box. 
Color: Powder coat green only
Weight: 93 lbs. 
Internet Special Price: $375.00 + freight
(NOTE: We have only (2) units left at this special price.)

Model Number: CN/CB-M3601-DT/IS (not shown)
Trash receptacle features flat steel bar construction, with a reinforcing steel tube encircling the top. Single piece, all welded construction. Ships fully assembled. 36 gallon capacity. Trash Receptacle kit includes: heavy rigid plastic liner, a cable anchor to secure lid to receptacle, a set of concrete anchors to bolt receptacle to surface, built in leveling feet, and a dome lid. New, in a box. 
Color: Powder coat black only
Weight: 93 lbs. 
Internet Special Price: $375.00 + freight
(NOTE: We have (20) units left at this special price.)


Nylon Recycling Liner Bags

Nylon Recycling Liner BagNylon Recycling Liner Bag Removed From Trashcan
 

These durable nylon recycling bags can be used inside a trash receptacle holder as an alternative to heavy trash cans and barrels. These light weight, but strong bags can be used for easy collection of recyclables such as cans and bottles. When the bag is full, pull the draw cord closed and remove the bag. Then replace it with an empty bag. It is easy to carry additional replacement bags.

The cylindrical recycling bags are fabricated from 10-oz. vinyl coated nylon tarp with double stitching on all seams. The 175 lb. strength nylon draw cord is threaded through non-rusting brass grommets. S-hooks are included to hang the bag inside the trash receptacle holder. Each bag includes drain holes in the bottom to let liquids out and to allow easy cleaning.

Model Number: CN-55NRB/IS
Dimensions: 26” diameter x 31” tall, for use in 55 gallon receptacles.
Weight: 1 lb.
Internet Special Price: $9.00 + freight
SPECIAL OFFER: Buy 25+ bags and get 15% off price.


Plastic Dome Lid – Model CN-PD/O-27/IS

Orange Plastic Dome Lid for Trashcan

Dimensions: 27-1/4 inch ID, 27-3/4 inch OD.
Colors: Orange only - only a few lids left in stock.
Model Number: CN-PD/O-27/IS
Approximate shipping weight: 9 lbs. 
Internet Special Price: $30.00 + freight

Website design and development by Spindustry Digital, Des Moines, Iowa