Channel Park Bench - Using Aluminum

The Channel Bench is designed to be stronger and more stable with a simple, clean design.  The benches are available with stationary and portable installation options.

Specifications:

FRAME: All welded steel frame construction: seat/back support channel is die-formed from 1/8" thick (11 ga.) steel; frame posts and portable foot are fabricated from 2-3/8" OD steel pipe.

FINISH: Hot dip galvanized finish after fabrication maximizes protection from the elements.  Or select a powder coat paint finish in your color choice.

INSTALLATION: Model PCXB is portable/surface mount so it can sit on the ground or be anchored to a hard surface.  The frame foot includes 9/16” diameter holes for anchor bolts (not included).  Use Model ANC3-4 Anchor Kit for 4', 6' or 8' bench.  Use Model ANC3-6 Anchor Kit for 15' bench.  For 21' or 24' bench, one of each anchor kits will be required.  Model SCXB is stationary/embedded mount with frame posts in concrete footings.

LENGTH: Channel Park Benches with aluminum can be 4, 6, 8, 15, 21 or 24 feet long.

SEAT & BACK MATERIALS: 2" x 10" (nom.) aluminum planks.  See Material Options.

OPTIONAL: Cover Caps, two-part aluminum caps to cover bottom of frame post for Model SCXB benches with embedded post.  Depending on the length of your bench you may need 2, 3, 4 or 5 cover caps per bench. The natural cast aluminum finish will match a hot dip galvanized frame finish. Or the caps will be powder coated to match the frame finish.  Click here to add Cover Caps to your Quote Cart.

OPTIONAL: Bench Foot Pads, durable, tear resistant black rubber; 2-1/2" diameter x 1" high; recessed center for fasteners (all fasteners included). Quantity of #BFP1-2 bench foot pads will vary per Model PCXB portable/surface mount bench depending on length and material (Qty 1 - BFP1-2 per frame leg).  Click here to add Bench Foot Pads to your Quote Cart.