XT Series Picnic Table - Using Aluminum
Model XT Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required.
Model XT Picnic Tables feature our non-tip, non-trip, walk-through design. The table won’t tip even if all persons sit on one side. Easy walk-through access. “Skid” design permits movement without damage to turf. Model XT Picnic Tables offer 30" nom. table height; 18" nom. seat height.
FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications). Top/seat mounting angles are 2" x 2" x 10 ga. die-formed steel. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. All 3/8" dia. galvanized carriage bolt fasteners. Warranted for life.
FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your color choice.
LENGTH: Tables can be 6, 8, 10 or 12 ft. long.
TOP/SEAT MATERIALS: 2" x 10" (nom.) aluminum planks, top is pre-assembled at the factory. Aluminum is available with clear anodized finish or in your color choice of powder coat paint finishes. See Material Options.
You May Also Like
The Channel Bench - Using Aluminum with clear finish or your choice of colors.